New England Rail Service, Inc.
Pullman Parts & Conversion Kits

Specifically designed to enable modelers to convert the
Rivarossi/AHM 12-1 Pullman sleeper into other Pullman car types.

- Online Order Form -

Currently we do not accept online orders. Please use our printable order form instead. Thank you!

Our minimum order is $25.00 except as noted.

Vermont Residents will be charged a 6% sales tax.
Terms and conditions are subject to change.
Your privacy is guaranteed! We do not sell, rent, or share your information with any third party.

Kit #	Description (Click on underlined items to see picture.)
#200	Pullman Paired Windows (6 and 2 filler strips):    $3.95 These windows are designed to perfectly duplicate the paired 28½ in. windows commonly found in most types of Pullman heavyweights, even paired window coaches.
#201	Pullman Single 24 in. Narrow Windows (12 Pieces):    $3.95 These windows duplicate the single 24 in. windows found in Pullman heavyweight cars of all types. Their most common use is for annex, smoking room or lavatory, where those with raised sill were used over a wash basin. The window with the upper and lower sash is the type used where a car has a buffet included.
#202	Pullman Single Wide Windows (16):     $3.95 This set contains both single 28½ in. windows and single 30 in. windows from heavyweight Pullmans. Single 28½ in. windows are used most commonly in aisles, in addition to other locations where only a single window can be accomodated. The single 30 in. windows are primarily used in bedrooms.
#203	Pullman Single Coach Windows (3 pieces):     $3.95 While Pullman constructed a number of coaches with paired windows, a number of roads preferred single windows. Thus these pieces with six single windows each. Three of them used in combination with a right and left hand #204 will do an entire car side
#204	Pullman Coach Toilet Windows (4 pieces):     $1.95 With coaches having single windows a wall panel somewhat wider than only a window post was needed between the window for the lavatory and either the end of the car or the seating area. Thus we offer coach toilet windows for both the right hand end of a car side and the left hand end to accommodate any need a modeler might have.
#205	Pullman Lounge/Sun Room Windows (8) / Vestibule Filler (4):     $3.95 This set contains four distinctly different types of windows in addition to two pieces designed to be used to fill the vestibule door area and have it look just like part of the car side. The windows are the standard 51 in. lounge window, the triple 31 in. observation room window, the double 36 in. sun room window and the triple 28 ½ in. sun room window.
#210	Pullman Interior Vestibule Wall (8):     $5.95 This is the interior vestibule wall piece that is designed to separate the vestibule area from the interior of the car on the model, just as it is separated on the prototype.
#212	Diner Kitchen Window & Food Service Doors:     $3.95 Our set of Pullman constructed diner kitchen windows. Four of the most common type of paired kitchen windows are included in each pack, while two each of the next two most commonly used kitchen windows are provided. Also included are two pieces each of both the 24 in. and the 28 in. food service doors.
#230	Pullman Pressurized Water Tanks (2) :     $4.95 Our Pullman Pressurized Water Tanks are designed to provide exact scale replicas of Pullman's 145 gal. water tank that was used on all Pullman fleet cars. Once assembled, both the filling valve and the five way operating handle are present and provide much more detailing than any brass replica of this item has offered. With Rivarossi's rendition of this water tank being the single most glaring error on their 12-1, it stands to reason that replacing it with this tank makes the single greatest difference in improving the underbody detail. The material in each package will make two complete tanks.
#231	Pullman 8 Cell Battery Box (2):     $4.95 All Pullman cars had at least one of these 8 cell battery boxes, many had two and a few had a 16 cell battery box. The completed battery box has all the detail of the prototype, including the screened ventilation ports on the ends and the drains in the floor. As usual, each package contains enough material for two complete battery boxes.
#250	Pullman Air Conditioning Duct (2):     $7.50 Introduced in 1989, our Pullman Air Conditioning Duct Kit continues to be one of our most popular items. While designed for the Rivarossi car, we have received reports of it being used for Athearn and other make cars as well. The duct is designed to be cut to length by the modeler to provide any length duct that might be required, from a very short section to one extending the entire length of the roof. Four different end pieces are included with each duct piece to accommodate this. There are left hand and right hand end pieces for intermediate use and left hand and right hand pieces for use when the duct extends over the vestibule as well. Thus the duct kit is truly universal in use for Pullman modelers.
#251	Pullman 6 ft. Ice Bunker (2):     $4.95 The single, 6 ft., ice bunker, like the larger double ice bunker, is designed for the modeler to equip his or her Pullman car with an ice activated air conditioning system. The bunkers look just like those on the prototype and can be constructed with handles if desired. When purchasing ice bunkers remember that Pullman used one 6 ft. ice bunker and two double ones (#252) on each car.
#252	Pullman Double Ice Bunker (2):     $4.95 This is the longer version of the ice bunker. Two of this size were used on each Pullman with an ice activated A/C system. Some modelers advise they modify this part for use as a toolbox on other models as well!
#253	Pullman Sump Tank & Pump (2):     $4.95 The Sump Tank & Pump housing is our first part done in molded resin, a medium we expect to use for some other detail parts to offer a Steam Ejector A/C system in the future. This part, however, has been needed to complete the package of parts needed for a full Ice Activated A/C system.
#255	Pullman Air Conditioner Compressor Box (2):     $4.95 Our Pullman Air Conditioner Compressor Box again provides a highly detailed replica of the original, complete with the screened drive guards on the ends. Remember that Pullman used the same compressor box on both mechanically and electrically air conditioned cars. The only difference was in whether the compressor was always driven by an electric motor or whether it was driven mechanically when the car was underway, with an auxiliary electric motor to drive it when the train was stopped or operating at a very low speed. Thus this part can be used with either the Pullman Mechanical A/C System or the Pullman Electro-Mechanical A/C System.
#256	Pullman Holdover Coil Box - Mechanical A/C (2):     $4.95 The brine auxiliary holdover coil was an addition to the mechanical A/C system to increase the system's cooling during station stops and low speed operation. It was installed on many cars between 1936 and 1941 but was largely discontinued following W.W. II, though the holdover coil box was left on those cars to which it had been applied. Again, our part offers the modeler a true scale replica of this unit.
#300	Pullman Coach Conversion Kit     $5.95
#301	Pullman Combination Car Conversion Kit     $4.95
#310	Pullman Plan 3584 10-2 Conversion Kit     $5.95
#311	Pullman Plan 3958 14 Sec. Conversion Kit     $5.95
#312	Pullman Plan 2410 12-1 Conversion Kit     $5.95
#313	Pullman Plan 2414 16 Sec. Conversion Kit     $7.95
#314	Pullman Plan 3973 10-1-1 Conversion Kit     $4.95
#315	Pullman Plan 3979A 8-1-2 Conversion Kit     $5.95
#316	Pullman Plan 4046B 12-2 Conversion Kit     $5.95
#317	Pullman Plan 4090 8-1-3 Conversion Kit     $4.95
#318	Pullman Plan 4084 6-6 Conversion Kit     $9.95
#319	Pullman Plan 2585 10-1-2 Conversion Kit     $9.95
#320	Pullman Plan 4158 12 Room - 2 Single BR - 3 Dbl. BR     $4.95
#321	Pullman Plan 4179 6 Sec. - 4 Rm - 4 Dbl. BR
#330	Pullman Plan 3416 28 Chair 1 DR Parlor Car     $4.95
#350	Pullman Ice Activated Air Conditioning Kit (Enough for 2 cars)     $23.95
#351	Pullman Ice Mechanical Air Conditioning Kit (Enough for 2 cars)     $23.95
#355	Pullman Ice Combination Air Conditioning Kit (Enough for 2 cars)     $23.95
#602	Central Vermont Steam Locomotive Decals     $9.95
#603	GPEX Milk Car Decals (Northeastern lessees)     Temporarily out of Stock!
#604	GPEX Milk Car Decals (Midwest lessees)     $9.95
#605	New Haven Heavyweight Pullman Decals		TBA
The Standard Car Company
#1000	½ Door Add-on Kit (Wood)     $5.95
From to (Click to enlarge)

All can be ordered from:

New England Rail Service, Inc. P.O. Box #5422 Essex Jct., VT 04543 e-mail: info@newenglandrail.com

Site Design & Maintenance: Site-By-Site! Internet Solutions